Panasonic WJSX350 Betriebsanleitung PDF herunterladen (Seite 9)

-7-

1. Log-in

To operate the Matrix Switcher System, a registered

operator must first supply his/her Operator Number and

Password to the system.

The operator number and password are established by

using the REGISTRATION table, See page 39 for more

details on operator number registration.

If an attempt is made to enter an operator number and

password that do not match with the registered operator

numbers and passwords, entry into this system is

denied.

As shown in the examples below, there are two (2) addi-

tional attributes associated with an operator: operator

level and priority. These items are described in more

detail on page 11.

Note:

Initially,

Operator Number: 1

Password: 12345

are registered at the factory to allow access for first

time system programming.

2. Camera and Monitor Selection

After logged in, the desired camera and monitor combi-

nation can be selected.

Basically, any combination of camera and monitor,

which are connected to the Switcher, can be selected

as shown below.

Operator Name: Mike

Operator Number: 1

Operator level: 1

Password: 07171

Priority: 1

Operator Name: Robert

Operator Number: 15

Operator level: 3

Password: 11524

Priority: 8

Monitor 1 Monitor 2

Matrix Switcher

WJ-SX350

321

654

987

FWDBACK

CAM

MON

SETESC

HISTORY

General Procedures

1. Select the desired monitor. (Monitor and Switcher

are linked.)

2. Select the desired camera (Camera and Switcher

are linked.)

3. The picture of the selected camera view is dis-

played on the selected monitor.

2-1. Monitor Selection

Press the Numeric button (1-8), then press the MON

(ESC) button to select the desired monitor.

For example:

When selecting Monitor Number 5:

Press 5, then press the MON (ESC) button.

Note: The desired monitor selection may not be avail-

able due to one of the following reasons:

1. The system controller used for selecting a particular

monitor is not allowed access to that monitor

because of controller partitioning.

See page 13 for more details.

2. The desired monitor is currently selected by another

operator who has a higher operator priority, and

therefore, control over that monitor.

In this case, the BUSY Indicator blinks.

2-2. Camera Selection

The video signal from the desired camera can be sup-

plied to the selected monitor. Press the Numeric buttons

(1-32), then press the CAM (SET) button to select the

desired camera.

321

654

987

FWDBACK

CAM

MON

SETESC

HISTORY

For example:

When selecting Camera Number 2:

Press 2, then press the CAM (SET) button.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

Panasonic WJSX350 Betriebsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras Panasonic WJSX350