Panasonic WJSX350 Betriebsanleitung PDF herunterladen (Seite 10)

-8-

Note: The desired camera selection may not be avail-

able due to one of the following reasons:

1. The operator is not allowed access to the desired

camera because the Operator Registration has lim-

ited the operator's access to certain cameras.

At this time PROHIBITED Indicator light up. See

page 11 for more details.

2. The desired camera is currently selected by anoth-

er operator who has a higher operator priority, and

therefore, control over that camera.

In this case, the BUSY Indicator lights up.

3. Camera Control

The selected camera (if applicable) can be controlled

from the Switcher’s front panel.

Specified Panasonic cameras, such as the WV-CSR400

or the WV-CSR600 series, can have various functions

controlled remotely without the need for a receiver.

Note: Because future camera models may have addi-

tional features and functions, please refer to the

Operating Instructions provided with the camera for

more details.

4. Accessory Control

The switches and buttons shown below enable control

of the following Camera Site accessories.

4-1. Focus Control

This control is used to adjust the lens focus to obtain a

sharply focused picture while observing the monitor.

4-2. Zoom Control

This control is used to adjust the lens zoom to obtain the

desired picture while observing the monitor.

4-3. Iris Control

This control is used to close or open the lens iris to

obtain the proper picture exposure while observing the

monitor.

SHIFT

AUTO FOCUS

FUNCTION

ON OFF

PRESET

POSI

CAM

POSI

AUTO PAN

RANDM PAN

AUX 1

WIPER

AUX 2

DEF

IRIS

NEAR FAR

OPEN

IRIS RESET

FOCUS

TELE WIDE

LEFT RIGHT

DOWN

ZOOM

CAMERA SITE CONTROL

4-4. Pan/Tilt Control

This control is used to pan or tilt the pan/tilt head.

The following operations are available.

1. Manual Operation

Using the Joystick Controller to move the Pan/Tilt

head towards the desired direction. Eight directions

are available: UP / DOWN / RIGHT/LEFT / UP-

RIGHT / UP-LEFT / DOWN-RIGHT / DOWN-LEFT.

2. Auto Panning Operation

Requires the use of a Pan/Tilt head with automatic

panning capability, such as the WV-7225.

3. Random Panning Operation

Requires the use of a Pan/Tilt head with automatic

panning capability, such as the WV-7225.

4-5. Auxiliary (AUX1, 2) Control

This control is used to turn On or Off the user’s auxiliary

switches located in the Receiver, such as the WV-

RC100, WV-RC150 or WV-RC170 Receiver.

5. Preset Control

The preset function is used to memorize the focus,

zoom, pan and tilt setting values of any scene to have

them available for easy recall at any time.

In addition, if the Camera Position Number is saved with

its associated camera number and preset position, the

camera position can be recalled quickly by activating

the camera selection and preset function at the same

time.

This control is available in a system using Panasonic

WV-CSR600 series cameras which are equipped with

the preset feature.

6. Sequence

This system has two kinds of sequential modes: Tour

and Group

6-1. Tour Sequence (T-SEQ)

A Tour Sequence consists of thirty-two (32) steps.

Each step has a Camera, Dwell Time and Auxiliary

Control or Pan/Tilt Preset assigned to it.

A total of thirty-two (32) Tour Sequences can be pro-

grammed on the T-SEQ setup tables.

A Tour can be assigned to any monitor.

• Auto Skip Function

The Auto Skip function is available in sequence

mode. If there is no video signal present at a step,

the sequence will automatically skip that step.

This function is enabled from programming the

Setup Menu.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

Panasonic WJSX350 Betriebsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras Panasonic WJSX350