Panasonic WJMP204 Betriebsanleitung PDF herunterladen (Seite 12)

WJ-MP204 SETUP MENU X.XX

COMMUNICATION

SYSTEM

■ Displaying the Setup Menu for

Panasonic Security Data Mode

1. Check that the cameras and peripherals are connected

correctly and securely.

2. Switch all the system components on.

3. Press the SETUP/ESC button for 2 seconds or more.

The Setup menu appears on the monitor.

4. Move the cursor up or down pressing button 1 (C) or

button 2 (D).

5. Press the SUSPEND/SET button. The COMMUNICA-

TION menu or the SYSTEM menu appears on the moni-

tor as shown below.

• The following buttons are used with the Setup menu.

1 (C): To move the cursor down

2 (D): To move the cursor up

3 (–): To select a mode or parameter

4 (+): To select a mode or parameter

SUSPEND/SET: To enter the selections and display

the submenu for the item indicated by the mark

SETUP/ESC: To return to the previous menu

COMMUNICATION

UNIT ADDRESS 1

BAUD RATE 9600

DATA BIT 8

PARITY CHECK NONE

STOP BIT 1

WAIT TIME OFF

SYSTEM

ALARM MODE ON

COMP/VD2/DATA

VS/VD INPUT VD

CAMERA CONFIG

DAISY MODE ON

TERMINAL ALARM

Note:

• To not display the Setup menu for CAMERA OUT pic-

tures, shift the internal switch.(See page 25.)

• To finalize the settings, press the SETUP/ESC button

for 2 seconds or more while the Setup menu is dis-

played.

• To use the System Controller WV-CU360 for operation,

refer to its Operating Instructions.

■ Communication Setup of

Panasonic Security Data Mode

1. Display the Setup menu.

2. Move the cursor to COMMUNICATION by pressing

button 1 (C) or button 2 (D).

Then press the SUSPEND/SET button.

• In case of Panasonic Security Data mode, the COM-

MUNICATION menu appears as shown below.

3. Move the cursor to the desired item by pressing button

1 (C) or button 2 (D), then select the desired mode by

pressing button 3 (–) or button 4 (+).

4. Press the SUSPEND/SET button.

5. After taking the above steps, press the SETUP/ESC

button for 2 seconds or more.

Note: All the settings must be compatible with the

peripherals connected.

• The following buttons are used with the Setup menu for

the WV-CU360. (For Panasonic Security Data mode

only)

COMMUNICATION

UNIT ADDRESS 1

BAUD RATE 9600

DATA BIT 8

PARITY CHECK NONE

STOP BIT 1

WAIT TIME OFF

: To move the cursor up and down

: To select a mode or parameter

: To enter the selections and display

the submenu

: To return to the previous menu

DOWN

STILL

EL-ZOOM

MON

CAM

ESC

SET

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 30 31

Kommentare zu diesen Handbüchern

Keine Kommentare

Panasonic WJMP204 Betriebsanleitung Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras Panasonic WJMP204