Panasonic CS-A9CKPG Bedienungsanleitung PDF herunterladen (Seite 5)

Outdoor Unit

• To protect compressor from reverse

rotation when there is a instantaneous

power failure.

60 Secs. Forced Operation Control

• Once the compressor is activated, it

does not stop within the first 60 secs.

However, it stops immediately with

remote control stop signal.

Overload Protector

• OLP to protect the compressor. Overload

Protector will trip when

– High temperature or high current flows

to compressor.

Compressor Reverse Rotation

Protection Control

Outdoor Fan Operation Control

• Temperature Fuse.

4-Way Valve Control

• When the unit is switched to “OFF”

during Heating Operation, 4-way valve

stays at Heating position for 5 minutes.

Overload Protection Control

• Outdoor fan stops when indoor heat

exchanger temperature rises to 51°C

(123.8°F) and above, and restarts when

the indoor heat exchanger temperature

drops to 49°C (120.2°F) and below.

• Compressor stop when indoor heat

exchanger temperature reaches 65°C

(149°F) or above. (Heating Operation

Only)

Deice Control

• To prevent frosting at outdoor heat

exchanger. (Only for Heating Operation)

•

Temperature of outdoor heat exchanger

is sensed by TRS (Thermal Reed Switch).

TRS OFF temperature 4°C (39.2°F).

TRS ON temperature -3°C (26.6°F).

Compressor Protection Control

• If the outdoor fan motor is not running

after compressor starts for 50 secs.,

compressor will stop. (Cooling and Soft

Dry Operation only).

Low Ambient Temperature Control

• To protect air conditioner from damage

under the low outdoor ambient

temperature < -10°C (14°F).

5

CS-A9CKPG CU-A9CKP6G / CS-A12CKPG CU-A12CKP6G

1 2 3 4 5 6 7 8 9 10 ... 81 82

Kommentare zu diesen Handbüchern

Keine Kommentare