Panasonic EY7202GQW Bedienungsanleitung PDF herunterladen (Seite 5)

-

5

-

CAUTION:

• To eliminate excessive temperature

increase of the tool surface, do not oper-

ate the tool continuously using two or

more battery packs. Tool needs cool off

time before switching to another pack.

LED light

CAUTION:

• The built-in LED light is designed to illu-

minate the small work area temporarily.

•

Do not use it as a substitute for a regular

flashlight, since it does not have enough

brightness

.

Depress the trigger switch,

then LED light turns on.

When the trigger switch

is released, the light

turns off automatically.

The light illuminates with

very low current, and it does not adversely

affect the performance of the driver during

use or its battery capacity.

This product has the built-in LED light.

This product is classfied into

“

Class 1 LED

Product

”

to EN 60825-1

Class 1 LED Product

Caution : DO NOT STARE INTO BEAM.

How to use the belt hook

WARNING!

• Be sure to attach the belt hook securely

to the main unit with the screw firmly fas-

tened. When the belt hook is not firmly

attached to the main unit, the hook may

depart and the main unit may fall.

This may result in an accident or injury.

• Periodically check screw for tightness. If

found to be loose, tighten firmly.

•

Be sure to attach the belt hook firmly and

securely onto a waist belt or other belt. Pay

attention to the unit not slipping off from the

belt.

This may result in an accident or injury.

• When the main unit is held by the belt

hook, avoid jumping or running with it.

Doing so may cause the hook to slip and

the main unit may fall.

This may result in an accident or injury.

• When the belt hook is not used, be sure

to return it to the storing position. The belt

hook may catch on something.

This may result in an accident or injury.

•

When the unit is hooked onto the waist belt

by the belt hook, do not attach driver bits

to the unit. A sharp edge object, such as a

drill bit, may cause injury or an accident.

To set the belt hook angle

position

1. Slide the belt hook lock lever 1 and hold

it to unlock the belt hook.

2

1

3

2. Pull the belt hook from

storing position 2 and

set it as desired angle.

3.

Release the belt hook

lock lever to

lock the

angle of belt hook.

4.

Make sure the belt hook is firmly locked

3

. Also make sure the belt hook is firmly

locked into position.

• The belt hook cannot

be locked in this posi-

tion. Firmly lock it into

position before use.

To return the belt hook to the storing position,

Follow step 1. and 2. above, then lower the

belt hook.

To secure the lock, follow 3 and 4 above.

To change the belt hook

location side

The belt hook can be attached to either

side of the unit.

1. Set the belt hook at storing position.

2. Loosen the screw turning it counter-

clockwise, using a coin or a flat blade

screw driver.

3.

Take out the belt hook and insert into the

other side of the slot on the main unit.

4. Fasten the screw firmly, turning it clock-

wise.

The belt hook can be taken out from the

main unit only when it is at storing position.

Additional Power Control

Functions

Quick Reference for Features and Functions

AB

C

Impact power mode select:

A

(See p.6.)

→

This unit is equipped with impact power

mode button.By pressing impact power mode

1 2 3 4 5 6 7 8 9 10 ... 123 124

Kommentare zu diesen Handbüchern

Keine Kommentare