Panasonic EY7202GQW Bedienungsanleitung PDF herunterladen (Seite 6)

-

6

-

button, soft

impact mode, medium impact

mode and hard impact mode can be

selected (3 settings).

∗

Please use this together with digital

clutch setting.

Digital clutch :

B

(See p.7.)

→

This unit is equipped with the digital

clutch function.

The driver rotation will stop when the set

clutch load is reached.

∗

Please use this together with impact

power mode select.

This digital clutch is not intended for

controlling the accuracy of the fasten

-

ing torque.

Example application not to be used;

To control the shut-off torque used to

tighten screws and bolts for manufac

-

turing and assembly.

Do not use the digital clutch when

tightening

screws with a low tightening

torque into materials, such as thin plastic.

Example applications not to be used;

When tightening screws into light-

weight steel sheet which thickness is

0.8 mm or less.

When tightening screws into soft sur-

face materials, such as interior finish

-

ing materials.

One-shot impact function :

C

(See p.7.)

→

Set the one-shot impact function to

tighten screws slightly to adjust the

screw head flush to the material surface.

Select the clutch setting to match the

application. This is used when readjust

-

ing is continuously required.

The driver automatically rotates approx-

imately half round and stops each time

the trigger switch is depressed. (For

bolts, it stops after approximately 5

impacts.)

Within 1 sec. after the trigger switch is

released once, if it is depressed again,

the one-shot impact function will auto

-

matically operate.

Indication lights on the control panel

The indication lights will go off in the

following cases.

• The driver is not operated for 5 min.

• When the battery is replaced.

Depressing the trigger switch again, then

indication lights go on in the previous

condition.

Main recommended applications

and setting guidelines.

(see p.11.)

Be sure to set the impact power mode

and digital clutch to match the material

and screws being used for the application.

Adjust the settings from low to high

while checking them to settle on a final

setting for impact power mode select

and for digital clutch setting.

When driving screws into wood, use

the screws of less than 90 mm long and

avoid knots of wood materials.

∗

One-shot impact function requires the

impact power mode select and digital

clutch settings.

Impact Power Mode Select

Selecting the impact power among 3

modes (Soft, Medium, Hard).

Impact power mode button

Press the impact power mode button to set it.

The mode changes to hard, medium, or soft

each time the button is pressed. To use auto

-

matic mode shifting, press the button for a

period (0.6 sec. or more). It is recommended

that the impact power mode select be used

together with the digital clutch setting and

one-shot impact function.

The driver is preset to “hard” impact mode

setting when shipped from the manufacturer.

Recommended work guideline table

When maximum power is required in each

impact mode, set the clutch to the “F” mode.

Impact

Power mode

Display

Recommended Application

H

For hard impact power mode.

Fastening long wood

screws.

Tightening bolts when

installing devices, etc.

Approx.

2,800R.P.M.

(

Max.

)

M

For medium impact power

mode.

Fastening small diameter

screws into hard materials.

Driving machine screws

when installing devices.

Approx.

2,500R.P.M.

(

Max.

)

S

For soft impact power mode.

Installing gypsum board.

Installing soft metal window

ame.

Installing interior nishings.

Approx.

2,000R.P.M.

(

Max.

)

1 2 3 4 5 6 7 8 9 10 11 ... 123 124

Kommentare zu diesen Handbüchern

Keine Kommentare