Panasonic HCV710EP Betriebsanleitung

Operating InstructionsHigh Definition Video CameraModel No.HC-V720HC-V727HC-V720MHC-V710Please read these instructions carefully before using this pro

- 10 -∫ About batteries that you can use with this unitThe battery that can be used with this unit is VW-VBT190/VW-VBT380.≥ The unit has a function fo

- 100 -≥ Use the HDMI mini cable (supplied).≥ HDMI is the interface for digital devices. If you connect this unit to a HDMI compatible high-definition

- 101 -2 Select the video input on the TV.≥ Example:Select the [HDMI] channel with a HDMI mini cable.Select the [Video 2] channel with an AV cable.(Th

- 102 -Connecting with a HDMI mini cableSelect the desired method of HDMI output.≥ [AUTO] determines the output resolution automatically based on info

- 103 -¬ Change the mode to .1 Select the menu.≥ If you are not using VIERA Link, set to [OFF].2 Connect this unit to a Panasonic TV compatible with

- 104 -3 Operate with the remote control for the TV.≥ You can select the scene or picture you want to play back by pressing the button up, down, left

- 105 -You can connect this unit to 3D compatible TV, convert the scenes and still pictures recorded in 2D (conventional image) to 3D and play back.¬

- 106 -Motion pictures or still pictures recorded with this unit can be copied between an SD card inserted in this unit and a built-in memory.∫ Check

- 107 -≥ When there are relay-recorded scenes in the built-in memory, a message appears on the screen. Touch [YES] and copy after combining relay-reco

- 108 -≥ Depending on the following conditions, the time it takes for copying may be longer.j The number of recorded scenes is large.j The temperature

- 109 -≥ In these Operating Instructions, “USB hard disk drive” is indicated as “USB HDD”.If you connect a USB HDD (commercially-available) to this un

- 11 -Charging the batteryThe unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the A

- 110 -4 Touch the desired item.≥ Following can be performed by connecting the USB HDD with the scenes and still pictures copied from this unit to oth

- 111 -∫ FormattingThis is for initialising the USB HDD.≥ Please be aware that if a media is formatted then all the data recorded on the media is eras

- 112 -Simple copy1 Connect this unit to the USB HDD to prepare for copying. (l 109)≥ You cannot supply power to the USB HDD from this unit.2 Touch [S

- 113 -Playing back the USB HDD≥ Only motion picture/still picture that have been copied by connecting this unit to the USB HDD or created with HD Wri

- 114 -∫ Check before dubbingCheck the equipment used for dubbing.* Some equipment may not be compatible with high-definition (AVCHD) picture quality.

- 115 -∫ To dub using equipment with an SD card slotYou can dub by directly inserting an SD card.≥To copy scenes or still pictures from the built-in m

- 116 -≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.)≥ When this unit is connecte

- 117 -∫ Dubbing using equipment without an SD card slot or a USB terminal, or using a video deviceYou can dub by connecting an AV cable (commercially

- 118 -By using an Eye-Fi card (commercially-available), you can record motion pictures and still pictures on the card, and save them on a PC or uploa

- 119 -∫ Using Eye-Fi direct modeThe files can be transferred directly from the Eye-Fi card to a smartphone without going through the wireless access

- 12 -≥ If you use other batteries, we cannot guarantee the quality of this product.≥ Do not heat or expose to flame.≥ Do not leave the battery(ies) i

- 120 -≥ The Eye-Fi menu only appears when an Eye-Fi card is used.≥ The Eye-Fi transfer feature cannot be guaranteed to continue to operate in the fut

- 121 -∫ Use this unit as a wireless LAN deviceWhen using equipment or computer systems that require more reliable security than wireless LAN devices,

- 122 -≥ When sending motion pictures or still pictures with the Wi-Fi function, do not cover the Wi-Fi transmitter with your hand. (l 9)≥ When the ba

- 123 -By linking with Wi-Fi compatible devices, you can use the Wi-Fi functions of [Remote Ctrl], [DLNA Play], [Live Cast] and [Hom.Monitor].Before u

- 124 -≥ If a message asking you to touch the NFC mark on the device is displayed when starting up the “Image App”, you can connect using NFC.When the

- 125 -(For tethering connection)Check if your smartphone is compatible with the tethering function.2 Acquire a USTREAM ID/Password/Program on the sma

- 126 -≥ The service may not be able to be used properly depending on the type of smartphone being used. For compatible devices, see the following sup

- 127 -Acquire a USTREAM ID/Password/Program using a smartphone or a PC.≥ Operation cannot be guaranteed on future USTREAM services and updates. The s

- 128 -To use the Wi-Fi function, connect this unit to a wireless access point or smartphone via Wi-Fi.∫ About the status indicator and the connection

- 129 -4 Set the wireless access point to waiting for WPS.≥ For further details, please read the operating instructions for the wireless access point.

- 13 -The unit can record still pictures or motion pictures to an SD card or built-in memory. To record to an SD card, read the following.Cards that y

- 130 -4 Enter the PIN code displayed on this unit screen into the wireless access point.≥ For further details, please read the operating instructions

- 131 -∫ When setting from the Wi-Fi setup menu1 Press Wi-Fi button. 2 Touch [Wi-Fi Setup].3 Touch [Set Wireless Access Point].4 Touch the part with n

- 132 -∫ When connecting by [Set Manually]1 Touch [Set Manually].2 Touch [INPUT], then enter the SSID of the wireless access point to be connected.≥ F

- 133 -Connecting to a smartphoneCheck if your smartphone is compatible with WPS.j If your smartphone is compatible with WPS:Proceed to the following

- 134 -∫ Connecting with QR code1 Press Wi-Fi button 2 Touch [Wi-Fi Setup].3 Touch [Direct Connection].4 Touch [Change connection type].5 Touch [QR co

- 135 -Please refer to the operating instruction of the device in use for details about the setting of the wireless access point or smartphone.If the

- 136 -Problem Check pointsThe Wi-Fi connection is not possible between this unit and a smartphone.(Wireless Access Point Connection)≥ Make sure the s

- 137 -Using a smartphone, you can perform record/playback operations from a remote location or upload motion pictures and still pictures recorded in

- 138 -≥ This unit is turned on even if it touches the smartphone on of this unit, where this unit is turned off with a LCD monitor.If you touch the

- 139 -∫ If the device is Android (NFC-compatible)≥ Turn on the NFC function.Using the NFC (Near Field Communication) function, you can easily transfe

- 14 -Inserting/removing an SD cardCaution:Check that the access lamp has gone off.1 Open the SD card cover and insert (remove) the SD card into (from

- 140 -Smartphone screen shots are example displayed in Motion Picture Recording Mode and Playback Mode.* The screen differs depending on the operatin

- 141 -∫ When Recording Mode≥ Turning the unit off≥ Selecting a mode≥ Recording motion pictures/still pictures≥Selecting a media to record≥ Using the

- 142 -Connecting this unit to a DLNA-compatible TV via Wi-Fi, you can play back scenes and still pictures on the TV.A DLNA-compatible TV1 Press Wi-Fi

- 143 -You can broadcast motion pictures of this unit live by setting up a link between the “LUMIX CLUB” and USTREAM.1 Press Wi-Fi button. 2 Touch [Li

- 144 -Touch .≥ / / will disappear when no touch function is performed for a specific period of time. To display them again, touch the screen.∫ To st

- 145 -≥ Recording is performed in Intelligent Auto Mode.≥ If you close the LCD monitor face down while recording, the LCD monitor of this unit will n

- 146 -∫ To set the line quality1 Touch [LINE QUALITY].2 Touch the desired line quality.≥ Frame rate in parentheses are when recorded in simultaneousl

- 147 -You can confirm the recording screen of this unit from outside using a smartphone.≥ Perform the monitoring operation on the smartphone. (l 149)

- 148 -∫ If the device is Android (non-NFC-compatible) or iOS1 Press Wi-Fi button and touch [Hom.Monitor]. 2 Start up the smartphone application “Imag

- 149 -∫ When configuring the home monitor settings using QR code1 Press Wi-Fi button. 2 Touch [Hom.Monitor].3 Touch [QR code].≥ QR code is displayed

- 15 -You can turn the unit on and off using the power button or by opening and closing the LCD monitor.Open the LCD monitor and press the power butto

- 150 -Automatic recordingYou can record a motion picture on this unit as it detects a moving or non-moving object.≥ Automatic recording will record f

- 151 -Configure various settings necessary to use the Wi-Fi function.When connected to Wi-Fi, the settings cannot be changed.1 Press Wi-Fi button. 2

- 152 -Please refer to page 147.If you set [ON], the LCD monitor turns off when remotely operating this unit with a smartphone (in Motion Picture Reco

- 153 -You can view and change this unit’s device name (SSID), which is used for operating this unit as a wireless access point.1 Touch [INPUT], and e

- 154 -Acquire a “LUMIX CLUB” Login ID (free).You can upload the scenes and still pictures recorded with this unit to WEB service with [Remote Ctrl] o

- 155 -∫ Check or change the acquired Login ID/Password≥ To change the “LUMIX CLUB” Password on this unit, access the “LUMIX CLUB” website from your s

- 156 -∫ Delete your Login ID and account from the “LUMIX CLUB”Delete the Login ID from this unit when transferring it to another party or disposing o

- 157 -HD Writer AE 5.0You can copy the motion/still picture data to the HDD of PCs or write to media like Blu-ray discs, DVD discs or SD cards using

- 158 -≥ It is possible to play back still pictures on a PC using a image viewer standard to Windows or commercially available image browsing software

- 159 -End User License AgreementBefore opening the CD-ROM package, please read the following.You (“Licensee”) are granted a license for the Software

- 16 -Operate the mode switch to change the mode to , or .You can operate by directly touching the LCD monitor (touch screen) with your finger.∫ T

- 160 -Article 9 With regard to MICROSOFT SQL SERVER COMPACT 3.5 produced by Microsoft Corporation(1) Licensee shall use the MICROSOFT SQL SERVER COMP

- 161 -≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used.≥ A CD-ROM drive is necessar

- 162 -≥ Supplied CD-ROM is available for Windows only.≥ Input is not supported in languages other than English, German, French, Simplified Chinese an

- 163 -∫ To use the HD Writer AE 5.0You will need a high performance PC depending on the functions to be used. It may not properly play back or proper

- 164 -When installing the software, log on to your computer as the Administrator or with a user name with equivalent authorization. (If you do not ha

- 165 -≥ Connect this unit to the PC after the software applications are installed.≥ Remove the supplied CD-ROM from your PC.A USB cable (supplied)≥ I

- 166 -∫ To disconnect USB cable safelySelect the icon in task tray displayed on the PC, and then click [Eject Panasonic Video Camera].≥ Depending o

- 167 -About the PC displayWhen the unit is connected to a PC, it is recognised as an external drive.≥ Removable disk (Example: ) is displayed in [Co

- 168 -≥ To use the software, log on as an Administrator or as user name for standard user account (only for Windows 8/Windows 7/Windows Vista).The so

- 169 -≥ HD Writer AE 5.0 is not available for Mac.≥ iMovie’11 supported. For details about iMovie’11, please contact Apple Inc.≥ iMovie’11 is not com

- 17 -∫ About the operation icons///:Touch when changing a page or performing settings.:Touch to return to the previous screen.About the Touch MenuTou

- 170 -* only∫ Recording indicationsOthersIndicationsMotion Picture Recording Mode Still Picture Recording ModeHC-V720M0h00m00s1h30m15. 11. 2013 12:3

- 171 -BPRE-REC (l 57)Time Lapse Recording (l 45)//Bass Setting (l 73)Zoom Microphone (l 71)Focus Microphone (l 71)Stereo Microphone (l 71)Wind Noise

- 172 -∫ Playback indications ∫ //Indication of connection to Wi-Fi∫ Indication of connection to USB HDD∫ Indication of connection to other devices∫ C

- 173 -Major confirmation/error messages to be indicated on the screen in text.*1 only*2 / / onlyOthersMessagesPERIODICALLY MAKE BACK UP OF DATA IN

- 174 -About recoveryIf faulty management information is found, the messages may appear and a repair is performed. (Repairing may take time depending

- 175 -∫ It is not a malfunction in following casesOthersTroubleshootingA clicking sound is heard when the unit is shaken.≥ This is the sound of the l

- 176 -“ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.” is displayed.≥ The unit has automatically detected an error. Restart the unit by tu

- 177 -RecordingProblem Check pointsThe unit arbitrarily stops recording.≥ Use an SD card that can be used for motion picture recording. (l 13)≥ The r

- 178 -With other productsProblem Check pointsAlthough this unit is correctly connected to a TV, images or sounds cannot be seen.The images are squeez

- 179 -With a PCProblem Check pointsWhen connected by the USB cable, this unit is not detected by the PC.≥ After re-inserting the SD card into the uni

- 18 -∫ To display the Touch Menu≥ Do not touch on the LCD monitor with hard pointed tips, such as ball point pens.The clock is not set at the time of

- 180 -I have forgotten the password for the Wi-Fi.≥ Perform [Reset Wi-Fi Settings] from the Setup menu (l 36). This will set the Wi-Fi setting to the

- 181 -∫ If AVCHD scenes do not change smoothly when played back on another deviceThe images may be still for several seconds at the joins between the

- 182 -Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.).≥ If you use this unit o

- 183 -When you are not going to use the unit for an extended time≥ When storing the unit in a cupboard or cabinet, it is recommended that you place a

- 184 -If you drop the battery accidentally, check to see if the terminals are damaged.≥ Inserting a battery with damaged terminals can damage the uni

- 185 -About 3D viewingAnyone who is hypersensitive to light, suffers from heart disease or is otherwise unwell should avoid viewing 3D image.≥ Doing

- 186 -≥ When the LCD screen is dirty or condensation has occurred, please wipe it using a soft cloth such as eyeglass cleaner.≥ Do not touch the LCD

- 187 -∫ Carefully observe copyright lawsRecording of pre-recorded tapes or discs or other published or broadcast material for purposes other than you

- 188 -This product incorporates the following software:(1) the software developed independently by or for Panasonic Corporation,(2) the software owne

- 189 -≥ SD cards are only mentioned with their main memory size. The stated times are the approximate recordable times for continuous recording.A Fav

- 19 -∫ Basic camera positioning1 Hold the unit with both hands.2 Put your hand through the grip belt.3 It is convenient to use the Recording button i

- 190 -≥ SD cards are only mentioned with their main memory size. The stated number is the approximate number of recordable pictures.≥ The number of r

- 191 -Attach the Wide Conversion Lens (VW-W4907H: optional) ND filter or MC protector of the Filter Kit (VW-LF46NE: optional) in front of the lens.≥

Panasonic CorporationWeb site: http://panasonic.net

- 2 -∫ About the recording format for recording motion picturesYou can record motion pictures in either AVCHD*1 or iFrame recording formats using this

- 20 -The card and built-in memory can be selected separately to record motion pictures or still pictures.1 Change the mode to or .2 Select the men

- 21 -1 Change the mode to .2 Open the LCD monitor.3 Press the recording start/stop button to start recording.A Recording button iconB When you begin

- 22 -≥ To change the recording format, change the [REC MODE]. (l 63)≥ Still pictures can be recorded while recording the motion picture. (l 24)≥ The

- 23 -1 Change the mode to .2 Open the LCD monitor.3 Press the button halfway. (For Auto Focus only)Focus indication:4 Press the button fully.≥ I

- 24 -∫ About the screen indications in Still Picture Recording Mode∫ About the focusing areaWhen there is a contrasting object ahead or behind the su

- 25 -The following modes (appropriate for the condition) are set just by pointing the unit to what you want to record.*1 In Motion Picture Recording

- 26 -∫ Intelligent Auto ModeWhen switching to Intelligent Auto Mode, the Automatic White Balance and Auto Focus operate and automatically adjust the

- 27 -1 Change the mode to .2 Touch the play mode select icon A (l 17).≥ You can also set by touching , selecting [VIDEO SETUP] or [PHOTO SETUP] # [

- 28 -5 Select the playback operation by touching the operation icon.* When pressed two times, the fast rewind/fast forward speed increases. (The scre

- 29 -≥ Sound will be heard only during normal playback.≥ If pause play is continued for approx. 5 minutes, the screen returns to the thumbnails.≥ The

- 3 -∫ Cards that you can use with this unitSD Memory Card, SDHC Memory Card and SDXC Memory Card≥ 4 GB or more Memory Cards that do not have the SDHC

- 30 -≥ Touch (left side)/ (right side) of on the Touch Menu to display . (l 17)1 Touch .2 Touch the top menu A.3 Touch the submenu B.≥ Next (p

- 31 -Set the display method for the screen information display.Please refer to page 18.It is possible to display and record the time at the travel de

- 32 -≥ When the home region is set for the first time, the screen for selecting home/travel destination appears after setting the home region success

- 33 -You can set the display method of the zoom button icons ( / ) and recording button icon ( ).Please refer to page 55.Please refer to page 101.Whe

- 34 -The unit is put into recording pause approx. 1 second when the unit is turned on with the mode set to or .≥ Depending on the recording conditio

- 35 -Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this sound.When [OFF] is selected, the sound is

- 36 -It adjusts brightness and colour density on the LCD monitor.≥ These settings will not affect the images actually recorded.1 Select the menu.2 To

- 37 -The entered character is confirmed in approx. 1 second after character input, and the cursor is moved to the right.It makes the input easy witho

- 38 -The used space and remaining recordable time of the SD card and built-in memory can be checked.≥Touching [CHANGE MEDIA] switches the unit betwee

- 39 -This item is used to start the unit demonstration.≥ If [DEMO MODE] is switched to [ON] and you touch [EXIT] when there is no SD card inserted an

- 4 -Read this first ... 2PreparationNames and Functions of Main Parts ... 6Power supply...

- 40 -A Zoom bar≥ Maximum zoom ratio for recording motion pictures can be set with [ZOOM MODE]. (l 62)∫ About the zoom barThe zoom bar is displayed du

- 41 -Use the Image Stabilizer to reduce the effects of shake during recording.This unit is equipped with Hybrid Optical Image Stabilizer.Hybrid Optic

- 42 -1 Touch the Recording Mode button icon.2 Touch the desired Recording Mode button icon.* In Motion Picture Recording Mode only≥ Pressing the Inte

- 43 -Please refer to page 25 for details about the effect of each mode.(Portrait)/ (Scenery)/ (Spotlight)*1/(Low Light)*1/(Night Portrait)*2/ (Night

- 44 -1 Touch to adjust the horizontal position of the in-focus portion.≥ If you touch the screen, you can adjust the horizontal position of the in-

- 45 -1 (When adjusting the brightness)Touch .≥ The level of brightness is switched every time you touch the icon.(Standard) # (Bright) # (Dark)2 (Whe

- 46 -≥ Change the Recording Mode to . (l 42)Touch the desired Scene Mode.≥ Touch [ENTER].≥ (Sports/Portrait/Soft Skin/Spotlight/Snow/Beach/Sunset/Sc

- 47 -≥ (Fireworks)j The shutter speed is 1/25.j Image may get washed out when recorded in bright surrounding.≥ (Night Scenery/Night Portrait)j The sh

- 48 -≥ The Manual Focus, White Balance, Shutter Speed, Brightness (Iris and Gain) settings are retained when you change between Motion Picture Record

- 49 -White BalanceAutomatic White Balance function may not reproduce natural colours depending on the scenes or lighting conditions. If so, you can a

- 5 -Copy/DubbingCopying between SD card and Built-inMemory [HC-V720M] ... 106Copying/playing back with a USB HDD...

- 50 -Manual shutter speed/iris adjustmentShutter Speed:Adjust it when recording fast-moving subjects.Iris:Adjust it when the screen is too bright or

- 51 -Manual Focus adjustmentIf auto focusing is difficult due to the conditions, then use Manual Focus.≥ Switch to Manual Mode. (l 48)1 (When MF assi

- 52 -You can record using convenient functions just by the easy operation of touching the screen.1 Touch (left side)/ (right side) of on the Tou

- 53 -This function detects the horizontal tilt of the unit, and automatically corrects it to the level position before recording.1 Touch .≥ Icon is d

- 54 -It is possible to set the focus and exposure to the subject specified on the touch screen.The focus and exposure will keep following the subject

- 55 -In Motion Picture Recording Mode, you can further improve optical image stabilization by touching and holding . With this function, you can fur

- 56 -Select the operation icons to add different effects to the images to be recorded.1 Touch (left side)/ (right side) of on the Touch Menu to

- 57 -When you start recording, the image/audio gradually appears. (Fade in)When you pause recording, the image/audio gradually disappears. (Fade out)

- 58 -≥ After setting PRE-REC, if recording starts in less than 3 seconds, motion pictures taken 3 seconds before pressing the recording start/stop bu

- 59 -When the button is pressed, the flash is activated and the picture will be recorded. Use the Built-in flash in order to record still pictures

- 6 -1 Shoe adaptor release lever [SHOE ADAPTOR RELEASE] (l 191)2 Intelligent auto button [iA] (l 25)3 Optical Image Stabilizer button [ O.I.S.] (l 41

- 60 -This is for recording still pictures using the timer.Each time the icon is selected, the indication changes by one setting in the following orde

- 61 -You can check if the image is level while recording or playing back motion pictures and still pictures. The function can also be used to estimat

- 62 -When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures.≥ Set Creative Control Mode to

- 63 -Switch the picture quality and recording format of the motion pictures to record.*1 Recording will have higher quality in the order of [PH], [HA

- 64 -Face Recognition is a function for finding faces that resemble faces which have already been registered and automatically prioritising focus and

- 65 -Entering text≥ The characters can be conveniently input without moving the cursor when the [Auto Cursor Position] is set to [ON]. (l 37)≥ A maxi

- 66 -∫ Cancelling a registered person1 Select the menu.≥ Touching [DELETE ALL] cancels all the registered people.2 (When [DELETE] is selected)Touch t

- 67 -Detected faces appear with frames.≥ Up to 15 frames are indicated. Larger faces and faces nearer to the centre of the screen take preference ove

- 68 -This function displays the horizontal/vertical tilt of the unit with the electronic level.∫ To correct the tilt≥ The horizontal tilt display A a

- 69 -If the unit continues to be tilted upside down from the normal horizontal position while recording motion pictures, it is automatically put into

- 7 -15 Shoe adaptor mounting part [SHOE ADAPTOR] (l 191)16 Status indicator (l 15, 128)17 Recording start/stop button (l 21)18 LCD monitor (Touch scr

- 70 -Message is displayed when this unit is moved rapidly.When “CAMERA PANNING IS TOO FAST.” appears, move the unit slowly while recording.≥ Message

- 71 -You can switch the channel number setting of the built-in microphone.≥ The option is set to [2ch] when an external microphone is connected.Recor

- 72 -When recording, the input level from the built-in microphones and the external microphone terminal can be adjusted.1 Select the menu.2 (When [SE

- 73 -Change the lower setting of the built-in microphone according to your choice.≥ Switch to Manual Mode. (l 48)≥ Normally set to [0dB].≥ Select [+3

- 74 -The higher the number of pixels, the higher the clarity of the picture when printing.≥ The number of recording pixels that can be set changes de

- 75 -This allows you to select the aspect ratio of the pictures to suit printing or the playback method.≥ This function’s default setting is [16:9].≥

- 76 -Recording is done continuously at the rate of 50 still pictures per second.Use this function to record an object with fast movement.1 Select the

- 77 -The video light is turned on to make it easier to focus when you are recording in dark places where it is hard to focus.≥ Switch to Manual Mode.

- 78 -Motion picture playback using operation iconFor details on the basic playback operations, refer to page 27.Advanced (Playback)Playback Operation

- 79 -Creating still picture from motion pictureA single frame from the recorded motion picture can be saved as a still picture. (1920k1080) still pic

- 8 -24 Mode switch (l 16)25 DC input terminal [DC IN] (l 11)≥ Do not use any other AC adaptors except the supplied one.26 Photoshot button [ ] (l 23)

- 80 -Highlight & Time Frame IndexAn image of one scene is displayed as a thumbnail at set search condition. Scene can be played back from any mid

- 81 -Resuming the previous playbackIf playback of a scene was stopped halfway, the playback can be resumed from where it was stopped.If playback of a

- 82 -Playing back motion pictures/still pictures by dateThe scenes or the still pictures recorded on the same day can be played back in succession.1

- 83 -Highlight PlaybackPart that was recognised as clearly recorded is extracted from multiple scenes, and it can be played back or stored in a short

- 84 -∫ Setting up the custom effectIt is possible to enjoy the Highlight Playback with your favourite effect by setting up the combination of an imag

- 85 -Touch [SET] to select the item to change.∫ Scene setting1 (Only when Highlight Playback is started from [ALL AVCHD])Touch the recording format o

- 86 -∫ Checking the favourite scenes1 Touch the scenes to be played back.2 Touch [Add] and add the favourite part.≥ Approximately 4 seconds before an

- 87 -∫ Priority settings1 Touch [FACE] or [FACE RECOG.].≥ If you touch [FACE], any detected face, including the face of person registered for Face Re

- 88 -The scenes put together as a Highlight Playback can be saved as a single scene.//The recorded scenes can be saved in the SD card.The recorded sc

- 89 -Changing the playback settings and playing back the slide show1 Touch . (l 17)2 (Only when you would like to change the settings)Touch [SET] to

- 9 -//30 Wi-Fi button [Wi-Fi] (l 128, 133, 138, 142, 143, 148, 151)31 Wi-Fi Transmitter (l 122)32 NFC touch area (l 137)HC-V720HC-V727HC-V720M303132

- 90 -(When [EFFECT SETUP] is selected)Touch the desired effect.≥ When [EFFECT SETUP] is changed, [MUSIC SELECT] will be set the same as [EFFECT SETUP

- 91 -¬ Change the mode to .∫ To delete the scene or still picture being played backTouch while scenes or still pictures to be deleted are being pl

- 92 -4 (When [MULTI] is selected in Step 2)Touch [Delete].≥ To continuously delete other scenes/still pictures, repeat Steps 3-4.When you stop deleti

- 93 -Deleting part of a scene (AVCHD)Unnecessary part of an AVCHD scene can be deleted.The deleted scenes cannot be restored.≥ Change the mode to a

- 94 -Dividing a scene (AVCHD)It is possible to divide an AVCHD scene. Any unwanted parts in the scene can be deleted after dividing.≥ Change the mode

- 95 -Dividing a scene to partially delete (iFrame/MP4)Divide the iFrame scene or the scene saved as MP4, and delete unnecessary parts.This divides th

- 96 -Deleting personal informationDeletes Face Recognition information from scenes in which faces were recognised.≥ Change the mode to and touch th

- 97 -Before copying, convert the scenes recorded in AVCHD to those with the image quality (MP4: 640k360/25p) that supports playback on a PC or upload

- 98 -You can combine the relayed scene (l 63) in the built-in memory and the continued scene in the SD card to be one into the SD card.A Built-in mem

- 99 -To cancel relay information≥ When the relay information is cancelled, combining of the relayed scenes will not be possible anymore.≥ The persona