Panasonic EY4541 Bedienungsanleitung PDF herunterladen (Seite 11)

Adjusting the orbital stroke mode

• Adjust the orbital stroke mode to the

object to be cut.

3

2

1

0

Lever

position

Blade

movement

Main

applications

0

Vertical only

• Cutting hard met-

als such as steel

• Smooth cutting of

building materi-

als and plywood

boards

• Cutting around

small curves

1

Low orbital stroke

mode

• Cutting softer met-

als such as alu-

minum and other

non-ferrous metals

• Cutting hardwood,

plywood boards

and plastics

2

Medium orbital

stroke mode

• Cutting fairly soft

materials

• Cutting wood and

composite boards

• High-speed cut-

ting of aluminum

and soft steel

3

High orbital

stroke mode

• Cutting soft mate-

rials

• High-speed cutting

of materials such

as wood, com-

posite boards and

plastics

• If you would like to produce a cleaner

finish, set the orbital stroke mode to a

lower level.

Anti-splintering plate

Use the anti-splintering plate to re-

ducing splinter while cutting wood.

Installation

1. Set the base at 90 degree position.

2. Place the anti-splintering plate on the

underside of the base, and gently

push it to be installed.

• Install so that the beveled edge of the

slot in the middle of the anti-splinter-

ing plate is facing toward the jigsaw.

Dust adapter for vacuum cleaner

(EY9H009E) (Available as an

accessory, not included)

You can use a vacuum cleaner to col-

lect cutting dust while cutting.

Installation

1. Attach the hook of the dust collec-tion

adapter to the front of the base.

2. Snap the rear to install it.

3. Attach the hose of the vacuum

cleaner.

• It is recommended to use a dust adapt-

er for reducing the risk of damaging the

surface of the object being cut.

-

11

-

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare