Panasonic CF-E1M Bedienungsanleitung PDF herunterladen (Seite 55)

Disk Operations

Cannot read/write to a

floppy disk

• Has the floppy disk drive been correctly connected?

• Has the floppy disk been correctly formatted?

• Your floppy disk content may be corrupted.

• Is the floppy disk write-protected?

Unable to read/write to the

hard disk

• Your drive or file may not have been properly set.

• Check to see if the hard disk is full. If it is full, delete unnecessary files.

• Your hard disk content may be corrupted. Contact Panasonic at 1 -800-272-7033.

A CD or DVD cannot be

ejected

Is the computer ON? To eject a disc when the

computer is OFF, insert the eject pin (included)

intO'the recessed manual disc eject button and

pull out the tray.

Recessed Manual Disc Eject Button

DVD-ROM indicator lamp

(@) does not light

Is the disc properly set on the tray?

A CD or DVD disc cannot

he played or read

Is the disc deformed? Or, are there marks or dirt on the disc?

If there is dirt on the disc, clean the disc (q= page 24).

A blue background appears

on the screen with the

MPEG image

Did you open the DVD-ROM drive or remove the disc while it was operating?

Re-insert the disc and close the DVD-ROM drive. Press C Enter ) .

The vibration of the DVD-

ROM drive is large

Are you using a deformed disc or a labeled disc?

The DVD-ROM drive can

not be used in the MS-DOS

mode

When using the DVD-ROM drive in the MS-DOS inode, add the necessary driver with

the following procedure.

1 Select [Start] - [Shut Down],

2 Select [Restart in MS-DOS mode] and click [OK],

3 Open the “CONFIG.SYS” file for editing by issuing the following commands:

cd \ (EnteO

edit config.sys C Enter)

4 Move the cursor to the line containing “OAKCDROM.SYS” and delete the characters

“rem” at the beginning of the line. (Deleting “rem” causes the item to become valid.)

DEVICEHIGH-C:\WINDOWS\COMMAND\OAICCDROM.SYS /D:MSCD000

(If this line is missing, add it.)

_____

__________________

5 Press CHD+CEi , then CE) to save the file. Then press CSD+CD , then CD to exit

the Edit program.

6 Follow the same steps to edit the “AUTOEXEC.BAT” file,

edit autoexec.bat C Enter)

7 Move the cursor to the line containing “MSCDEX.EXE” and delete the characters "rem"

at the beginning of the line. (Deleting “rem” causes the item to become valid.)

LOADHIGH C:\WINDOWS\COMMANDVMSCDEX.EXE /DiMSCDOOO /L:L

(If this line is missing, add it.)

_____

__________________

6 Press CM) +CD , then CD to save the file. Then press CM)+Cf) , then CD to exit

the Edit program. ______

__________

_________

9 Restart the computer by pressing CM) + rctrD + fpin.

Communication

Unable to connect to the

telephone line

• Confirm that the connection between the modem and the telephone line is correct.

• Confirm that the correct type of telephone line has been set.

• Are the communication settings correct?

# Network

Unable to connect to a net

work

• When using the computer as a network computer, additional settings may need to be set

depending on the usage conditions. Ask your system administrator or the person in eharge

of the network.

• The computer must be restarted if hibernation mode is entered.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare

Panasonic CF-E1M Bedienungsanleitung Seite 55

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computers Panasonic CF-E1M