Panasonic WV-CF600 Installationsanleitung PDF herunterladen (Seite 18)

Connect the ∅3.5 mm miniature plug (mono channel) to the adjustment monitor output jack.

Important:

•Thisvideo output is intended for confirmation of view angle, etc. during installation or repair

service, and not for recording or monitoring.

Note:

•Video cannot be output through the video output cable after connecting the adjustment

monitor.

2 Pan, tilt and azimuth adjustment

Important:

•

Whenadjustingpan,tiltorazimuth,donotholdthelensofthecamera.

1 Adjustment of panning position

Loosen the panning table lock screw and

rotate the table to determine the panning

position (adjustable range: 350°).

• The panning position can be adjusted

between +180° (clockwise) and –170°

(counter-clockwise).

• Afterthepanningpositionisdetermined,fix

the panning table with the panning table

lockscrew.

(Recommended torque: 0.39 N·m {0.29 lbf·ft})

2 Adjustment of tilting position

Turn the tilting table to adjust the tilting

position of the camera. (adjustable range:

±90 °)

• Theviewanglecanbeadjustedasthecam-

era uses vari-focal lens.

• Tightenthetiltinglockscrewafter

adjustment.

(Recommended torque: 0.59 N·m {0.43 lbf·ft})

Adjustment

Original position mark

Panning table

Panning table lock

screw[LOCK]

Clockwise: +180 º

Counter-

clockwise: -170 º

Adjustable range: ±90 º

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Keine Kommentare

Panasonic WV-CF600 Installationsanleitung Seite 18