Panasonic WV-SP509 Installationsanleitung

Before attempting to connect or operate this product, please read these instruc-tions carefully and save this manual for future use.The model number i

10Network securityAs you will use this unit connected to a network, your attention is called to the following security risks. q Leakage or theft of i

11PrecautionsRefer installation work to the dealer.Installation work requires technique and experi-ences. Failure to observe this may cause fire, elec

12Do not rub the edges of metal parts with your hand.Failure to observe this may cause injury.Do not touch this product, the power cable or the connec

13data on the SD memory card will be delet-ed when formatted. If an unformatted SD memory card or an SD memory card formatted with other devices is

14Precautions for InstallationThis camera is designed to be used indoors.This camera is not operable outdoors.Do not expose this camera to direct sunl

15Screw tightening • The screws and bolts must be tightened with an appropriate tightening torque according to the material and strength of the insta

16Major operating controls<Side view>WLens (option)ALC lens connectorABFWABFSDCARD LOCKWSlide coverAuto back focus button (ABF)Clamp for SD memo

17<Rear view>About the [INITIAL SET] buttonAfter turning off the power of the camera, turn on the power of the camera while holding down this bu

18Lens mountingSlowly rotate the lens clockwise to mount the lens and connect the lens cable to the ALC lens con-nector of the camera. Optional dedica

19Note: • The most common use of a varifocal lens and a zoom lens Note that the adjustment method is different depending on the type. For further

2NOTE: This equipment has been tested and found to comply with the limits for a Class A digi-tal device, pursuant to Part 15 of the FCC Rules. These l

20Insert/remove a SD memory card (WV-SP509 only)IMPORTANT: • When inserting a SD memory card, make sure the direction. • Before removing the SD me

21InstallationConnect the safety wireThe following is an example of safety wire connection.IMPORTANT: • Be sure to install the safety wire. Ask your

22Wire engaging holeSafety wire (accessory)For mounting on wallz Put the tripod mount base on the bottom of the camera. Secure the safety wire lu

23Camera mountingThe camera is mounted on the camera mount bracket (locally procured) and the safety wire is secured. IMPORTANT: • The installation

24Safety wireSafety wireRecommended screw M6Minimum pull-out strength196 N {44.06 lbf}Foundation part of construction or part with adequate strengthIM

25ConnectionCaution: • ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY (UL 1310/CSA 223) or LIMITED POWER SOURCE (IEC/EN/UL/CSA 60950-1). Before starting t

26v Connect external devices to the EXT I/O terminal. When connecting an external device, remove 9 mm - 10 mm {11/32 inches - 13/32 inches} of the

27n Connect the power supply. IMPORTANT: • The 12 V DC power supply shall be insulated from the commercial AC power. • The operating sound might

28When using PoE (IEEE802.3af compliant)Connect a LAN cable (category 5 or better, straight, STP*) between a PoE device (such as a hub) and the networ

29Configure the network settingsConfiguring the camera so that it can be accessed from a PCThe following are descriptions for when the camera with def

3We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standard or other normative doc

30c Select the camera you want to configure, and click [Access Camera].Note: • When cameras are displayed in [Panasonic IP Setting] screen, click th

31TroubleshootingBefore asking for repairs, check the symptoms with the following table.Contact your dealer if a problem cannot be solved even after c

32Specifications● BasicPower source: 12 V DC, PoE (IEEE802.3af compliant)Power consumption: SP509 12 V DC: 570 mA, PoE 48 V: 125 mA (Class 2 devices)

33 BW: 0.3 lx {0.03 footcandle} (F1.4, Auto slow shutter: Off (1/30 s), Gain: On(High)) 0.02 lx {0.002 footcandle} (F1

34Image compression method: H.264*1 Image quality: Low/ Normal/ FineTransmission type: Unicast/Multicast Bit rate: Constant bit rate:

35SD memory card (option) SP509: SDXC memory card: 64 GB SDHC memory card: 4 GB, 8 GB, 16 GB, 32 GB SD memory card: 2 GB (except miniSD card

Information for Users on Collection and Disposal of Old Equipment and used BatteriesThese symbols on the products, packaging, and/or accompanying docu

4ContentsImportant safety instructions ... 5Limi

5Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5)

6Limitation of liabilityTHIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMI

7The following notations are used when describing the functions limited for specified models.The functions without the notations are supported by all

8About the user manualsThere are 2 sets of operating instructions for the WV-SP509, WV-SP508 as follows. • Installation Guide: Explains how to insta

9IMPORTANT: • When using a PC that does not meet the above requirements, displaying of images may become slower or the web browser may become inopera