Panasonic WV-CF344 Betriebsanleitung PDF herunterladen (Seite 24)

Step 2

Select a number (1 to 16) with which a pixel compensation point is registered and press the [SET] button.

→

The pixel compensation positioning screen appears.

Step 3

Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to move the crosshair cursor to the center of the ﬂaw to be corrected and press

the [SET] button.

→ The flaw is corrected and the pixel compensation point is registered. The “PIX OFF” screen appears again. An asterisk “*” is

attached at the right side of the number when registration is completed. The coordinate is expressed in figures.

Note:

 •Tocleartheregisteredpixelcompensationpoint,movethecursorto“1”oftherightof“DEL”,usethe[RIGHT] and [LEFT] buttons

to select the number with which the target pixel compensation point is registered and press the [SET] button. The registered pixel

compensation point is cleared, and an asterisk “*” at the right side of the number disappears.

22. Communication setting [COMMUNICATION]

CP310

CP300

CP310

CP300

The required communication conﬁguration is performed to use this unit integrated into the system with a receiver.

COAX (RCV): When using our receiver (e.g. WV-RC150).

COAX (default): When not using any receiver.

23. Default resetting [CAMERA RESET]

The settings in the setup menu are restored to the default settings.

Move the cursor to “

→

PUSH SET” of “CAMERA RESET” and hold down the [SET] button for more than 2 seconds to enter the

“RESET?” screen.

To return to the previous screen without resetting, move the cursor to “NO” and press the [SET] button. To restore the default

settings, move the cursor to “YES” and press the [SET] button.

Note:

 •Thedataoftheregisteredpixelcompensationpointsisnotcleared.

 •Tosetwhethertoresetthecamera,select“YES”or“NO”byusingthe[SET]button.Tosetwithacontroller,refertotheinstruc-

tion manual of the controller.

24. Serial number viewing [SER.NO.]

Displays the serial number of this product.

1 2 ... 19 20 21 22 23 24 25 26 27

Keine Kommentare

Panasonic WV-CF344 Betriebsanleitung Seite 24