Panasonic WV-SF538 Installationsanleitung PDF herunterladen (Seite 29)

Installation

Camera mounting

Installation shall be conducted after turning off each device.

z Detach the dome cover. (☞ Page 17)

x Connect the cables to the camera. (☞ Pages 23 - 28)

As necessary, use a cable tie (accessory) to assemble the cables.

c Mount the camera. (The illustration represents the case in which a two-gang junction box is

installed.)

Fix the camera with 4 screws (M4, locally procured).

Direction marker for installation

(×TOP)

ADirection marker for installation

(FRONTØ)

Two-gang junction box

Screws (locally procured)

46 mm {1-13/16 inches}

83.5 mm {3-9/32 inches}

IMPORTANT:

• When tightening the screws, be careful to ensure that the cables does not tangle the cables.

Note:

• For ceiling mounting

Select which direction to face the front (the side where the Panasonic logo and "FRONT" are)

of the camera. Refer to the "Adjustment" section (☞ pages 30 - 33) for further information

about adjustment.

• For wall mounting

The camera shall be mounted with the "TOP" marker facing upward.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 47 48

Keine Kommentare

Panasonic WV-SF538 Installationsanleitung Seite 29