Panasonic WV-CW504 Installationsanleitung PDF herunterladen (Seite 23)

Adjust the camera

Be sure to view the monitor for adjustment when the camera angle is adjusted.

Connect the monitor for adjustment (e.g. a small LCD) to the monitor output connector, and

adjust the camera angle.

When determining the camera angle, repeat fine follow the adjusting procedure of q, w, and

e shown below.

q Loosen the panning lock screw and rotate the camera head horizontally to adjust panning,

and tighten the panning lock screw.

w Loosen the tilting lock screws and rotate the camera head vertically to adjust tilting, and

tighten the tilting lock screw.

e Rotate the tilt adjusting table, and adjust the azimuth angle of the image.

Important:

 • Thepanninglockscrewandthetiltinglockscrewshallbesecurelytightened.

(Recommended tightening torque: 0.59 N·m)

Note:

 • ThevideooutputtotheBNCconnectorwillbeinterruptedwhileanadjustingmonitoriscon-

nected to the monitor output connector.

 • Atthesametimeforthepanandtiltadjustments,makefocusadjustmentsofStep2.

75 °

Tilting lock screw

Monitor output connector

(RCA)

Tilt adjusting table

Panning lock screw

Panning table

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

Keine Kommentare

Panasonic WV-CW504 Installationsanleitung Seite 23