Panasonic AW-RC600P Bedienungsanleitung

Before attempting to connect, operate or adjust this product, please read these instructions completely.Remote Control UnitAW-RC600P

10 Horizontal phase adjustment control [H.PHASE]This is used to adjust the horizontal phases of the gen-lock input and video output when two or more

11 Camera cable connector [CAMERA] (26-pin connector)The camera’s cable (such as the AW-CA50A26) is connected here. Contact-type pan/tilt head co

12 Video output connectors [VIDEO1, VIDEO2]The video signals from the camera after cable compensation are output from these connectors. (The same sig

13Connections Before proceeding with the connections, ensure that the power to all the devices is off. Be absolutely sure to use the AW-CA50A26 RC

141. Turn on the power.Set the unit’s power switch to [ON].Power switch2. Proceed with the cable compensation and gen-lock adjustments.Gen-lock adju

15Cable compensation1. Turn the cable compensation selector switch to match the length of the cable connecting the camera and the RCU.Switch positio

16AdjustmentWhite balance adjustments Automatic adjustment (AWC) Two sets of color temperature conditions can be stored in the memory. When us

17AdjustmentAuto setting indicator LEDRed and blue pedestal adjustment controlsAuto white/auto black setting switchBlack balance adjustments Automat

18AdjustmentGen-lock adjustmentWhen using the gen-lock function, the phases of the signals must be adjusted to bring the phases into alignment with t

19Menu item settingThe settings of the convertible camera were preset when the camera was shipped from the manufacturing plant. However, the menu item

2 indicates safety information.This class A digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe A est conform

20When the unit is to be mounted on a EIA 19-inch rack, use rack mount angles (provided) and four mounting screws (M410) (provided).1. Turn off the

21AppearanceUnit: inch (mm)16-9/16 (420)9-13/16 (250) 3-7/16 (88)

22Power supply: 120V AC, 60 HzPower consumption: Approx. 67 WVideo output: Composite signal 1.0 Vp-p/752 (BNC connector) R/G/B, Y/PR/PB, Y/C sig

PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANYUNIT COMPANY OF PANASONIC CORPORATION OF NORTH AMERICAExecutive Office:One Panasonic Way 4E-7, Sec

3 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near wat

4This remote control unit (RCU) is designed to be used with a convertible camera (such as the AW-E860, AW-E750, AW-E650, AW-E655 or AW-E350).By connec

5 Handle the unit carefully. Dropping the unit or subjecting it to strong impact may give rise to malfunctioning or accidents. Operate the unit w

6 Power switch [POWER OFF/ON]ON: At this setting, the power is supplied to the unit (and the power indicator LED lights).OFF: At this setting, th

7 Auto white/auto black setting switch [AWC/HOLD/ABC]Automatic adjustment of the white balance starts when this switch is set to the top position w

8 Red and blue pedestal adjustment controls [PAINTING PED R/B]These controls enable the black balance to be adjusted finely.When the black balance i

9 Lens iris selector switch [IRIS MANU/AUTO]The lens is set to automatic iris (ALC) if this switch is set to [AUTO] when the iris selector switch on