Panasonic WJ-HD616 Installationsanleitung PDF herunterladen (Seite 129)

129

Formattheharddiskdrives[Format]

Hard disk drives will be formatted, and one of the normal recording area, event recording area or pre-event recording area will be

assigned to each drive. It is necessary to format a hard disk drive on either of the following conditions.

 • Whenanharddiskdriveinstalledintherecorderisremovedoradded

 • Whenanoptionalextensionunitisconnectedandusedforthefirsttime

Important:

 • Whentheharddiskdriveisformatted,alltherecordedimageswillbedeleted.

 • Inthesinglemode,thecapacityofeachharddiskdriveisconfiguredandformatted.IntheRAID5/RAID6mode,thecapaci-

ty of each hard disk drive is configured and formatted by the unit.

 • Harddiskdrivesthathavealreadybeeninstalledorunformatteddrivesthatarenewlyinstalledwillautomaticallybeformatted

as the normal recording area when they are recognized.

 • Itisimpossibletoassigntwoormorerecordingareastoaharddiskdrive.

Step 1

Select the [Format] button on the disk configuration page.

→ The [Format] tab will be displayed.

Step 2

Select the recording area to be assigned to each hard disk

drive (to each unit in the RAID 5/RAID 6 mode).

Normal: Assigned to the normal recording area

Event: Assigned to the event recording area

–: Not formatted

Step 3

Select the [Format] button after setting the recording areas

for the hard disk drives.

→ The confirmation window will be displayed.

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 155 156

Keine Kommentare

Panasonic WJ-HD616 Installationsanleitung Seite 129