Panasonic VDRM30PP Betriebsanleitung PDF herunterladen (Seite 54)

Using External Microphone

Connect external microphone (optional-user provided) to the external microphone jack of this DVD

Palmcorder. Clearer sound can be recorded. Turn on the switch on microphone and start recording. For

details on microphone, see “Major Specifications” on page 164.

Note:

• If the AV/S input/output cable is plugged in, you cannot use external microphone: Unplug the AV/S input/output cable

to use the external microphone.

• This DVD Palmcorder cannot use a plug-in power type microphone (power supplied from palmcorder).

●Attaching Ferrite Core

Although no ferrite core is attached in the illustrations of the cables in text, be sure to attach the provided

core to the external microphone cable using the following procedure:

1Open the cover of ferrite core.

2Attach the core to external microphone cable at

a position approximately 1-15/16” (5 cm) from

its end.

3Close the cover of core, taking care that it does

not catch the external microphone cable.

Note:

• The Ferrite Core must be installed to minimize RF

interference and/or electrical noise that may be picked up

by the external microphone cord. It should be installed as

close to the plug as possible- as illustrated.

A/V

To exter nal

microphone jack

1-15/16”

(5cm)

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 171 172

Keine Kommentare

Panasonic VDRM30PP Betriebsanleitung Seite 54