Panasonic KXTG5480 Betriebsanleitung PDF herunterladen (Seite 85)

100

Answering System

Preparation

Telephone System Useful Information

For assistance, please call: 1-800-211-PANA(7262)

Troubleshooting

If the handset display shows error messages, see “If the Following Appear on

Your Display...” (p. 84) for the Cause & Remedy.

Telephone System

Problem Cause & Remedy

“No link to base.

Move closer to

base and try

again.” is displayed and an

alarm tone sounds.

• The handset has lost communication with the

base unit. Walk closer to the base unit, and try

again.

•

Confirm the base unit’s AC adaptor is plugged in.

• Raise the base unit antennas.

• If the above remedies do not solve the

problem, the handset may have lost

communication with the base unit. Register

the handset again (p. 64).

Static, sound cuts in/out, fades.

Interference from other

electrical units.

• Move the handset and base unit away from

other electrical appliances (p. 3).

• Walk closer to the base unit.

• Raise the base unit antennas.

• Turn on the Clarity Booster feature (p. 35).

• If the unit is connected to a telephone line with

DSL service, you may hear noise from the

receiver or speaker during conversations. We

recommend connecting a noise filter (contact

your DSL service provider) to the telephone

line between the base unit and the telephone

line jack.

The base unit/handset does

not ring.

• The ringer volume is turned off. Set to high,

medium, or low (p. 23, 24).

The handset display is blank. • If the handset display is blank, fully charge the

battery (p. 15).

You cannot program any

function items.

• Programming is not possible while the

handset or base unit is being used.

• Do not pause for over 60 seconds while

programming.

• Walk closer to the base unit.

• While another user is listening to messages or

the Answering System is handling a call, you

cannot program. Try again later.

While programming or

searching, the handset or base

unit starts to ring and the

program/search stops.

• A call is coming in. To answer the call, press

[

C], [s], or the called line soft key ( )

or ( ) on the handset, or press

[SP-PHONE] or the called line button on the

base unit. Start again from the beginning after

hanging up.

LINE1

LINE2

TG5480.book Page 85 Tuesday, March 8, 2005 6:28 PM

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 99 100

Kommentare zu diesen Handbüchern

Keine Kommentare

Panasonic KXTG5480 Betriebsanleitung Seite 85

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Telefone Panasonic KXTG5480