Panasonic WV-CF344 Betriebsanleitung PDF herunterladen (Seite 18)

Step 3

Hold down the [SET] button for more than 2 seconds after completion of masking.

→

Return to the previous menu.

Step 4

Move the cursor to “ALARM” and press the [LEFT] and [RIGHT] buttons to select “ON” or “OFF”.

ON: Outputs alarm signal when in display mode. Actions may be conﬁrmed through the motion detection mode when a moving

object is detected.

OFF (default): Does not output alarm signal when in display mode.

Step 5

Move the cursor to “DISPLAY MODE” and press the [SET] button.

→

The display mode screen appears.

If a moving object is detected in the set area, the area will be reversely highlighted. Hold down the [SET] button for more than 2

seconds to return.

MOTION DET

**(1)

RET TOP END

LEVEL

OFF

DWELL TIME

DISPLAY MODE

ALARM

MASK SET

....

Display mode screen“MOTION DET” screen

Step 6

Move the cursor to “LEVEL” and press the [RIGHT] or [LEFT] button to adjust the level.

Repeat step 5 and 6 to adjust to optimal level.

Step 7

Move the cursor to “DWELL TIME ” and select the dwell time from the following. (unit: seconds)

2S (default)/5S /10S /30S

Alarm signal will be issued once a continuously moving object is detected within the speciﬁed time.

Setting of scene change detection

This function detects a change in the subject state that occurs by covering the camera with a cloth, a cap, or others, or by changing

the camera direction largely.

Follow the procedure below.

Step 1

Move the cursor to “VMD” and press the [RIGHT] or [LEFT] button to select “SCENE CHANGE”.

“CAMERA SETUP” screen

VMD SCENE CHANGE

**CAMERA SETUP**

SCENE1

ALC/ELC ALC

SHUTTER OFF

AGC ON(HIGH)

SENS UP OFF

WHITE BAL ATW1

DNR HIGH

AUTO1

RET TOP END

D&N(IR)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 26 27

Kommentare zu diesen Handbüchern

Keine Kommentare

Panasonic WV-CF344 Betriebsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras Panasonic WV-CF344