Panasonic WV-SW558 Installationsanleitung PDF herunterladen (Seite 35)

Horizontal: 24.20° (TELE) to 86.60° (WIDE)

After adjustment, tighten the tilting lock screws (x2) to fix the tilting table.

(Recommended tightening torque: 0.59 N·m {0.44 lbf·ft})

Note:

• When the tilting table is turned to the edge of the adjustable range (±75°), it must be noted that

the shadow of the enclosure may be projected.

• When the camera is installed to a wall, the image is reversed in the default settings. To correct

the way the image is displayed, rotate the panning table 180° clockwise, or select "On" for

"Upside-down" from the setup menu. For information about performing the "Upside-down" set-

ting from the setup menu, refer to the Operating Instructions (included in the CD-ROM).

Image tilt adjustment

Rotate the azimuth adjustment ring to adjust the azimuth angle of the image. (Adjustable range:

±100 °)

Adjustable range

–100 °

+100 °

Azimuth adjustment ring

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

Keine Kommentare

Panasonic WV-SW558 Installationsanleitung Seite 35