Panasonic TC-LT1 Series Bedienungsanleitung PDF herunterladen (Seite 22)

System Examples

Remarks on System Installation

• Please read the User Manuals carefully for any equipment you intend to connect to the Projector.

• Make sure that the power is off for each piece of equipment before connecting any cables.

• If the included cables cannot be attached because of the location in which the projector is installed, please use

commercially sold cables that match the equipment to be connected.

• The signals that can be connected to the projector are video signals, S-Video Signals and Analog RGB Signals (with

synchronous signals of 0.6 - 8.0 Vp-p).

• The projector has one 1 W internal speaker. A separate audio system would be required to output high volumes, or to

enjoy stereo sound (please connect each device directly to the audio system).

• Some computer models cannot be connected to the Projector,

Connecting to AV Equipment

Video

• The S-Video In terminal will have priority when cables are connected to both the S-Video In and the Video In

terminals. Please do not connect a cable to the S-Video In if you wish to project video signals.

• If the video signal is to be connected using a BNC plug cable, please use a (commercially sold) BNC-Pin Adapter

if you wish to convert to a pin jack.

• The left audio and the right audio for the Video Input are combined within the Projector into monaural audio.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Keine Kommentare

Panasonic TC-LT1 Series Bedienungsanleitung Seite 22