Panasonic KX-P6500 Bedienungsanleitung PDF herunterladen (Seite 55)

Care and Maintenance

Troubleshooting

Many problems associated with the printer can be traced to improper setup or cabling. The following table will assist

you in identifying and correcting some of the more common problems.

Trouble Possible Cause Corrective Action

LED not blinking

No AC power

Check power cord.

Power on but printer not

printing data

Interface cable not connected

Check interface cable.

Clean paper path (P. 54).

Stains on paper

Dirty paper path

fi)

“D

Vertical line on paper

Dirty paper path

Dirty tungsten wire

Clean tungsten wire ( c®" P. 54).

Dirty laser unit mirror Clean the laser unit mirror (P. 54).

Scratch on drum

Replace Process Unit.

Scratch on fuser roller

Replace fuser. The printer requires service by an

Authorized Panasonic Service Center.

Very faint print

Toner may be empty

Shake the Process Unit or refill the toner in the

Process Unit { P. 58).

Print density not adjusted

Select the proper print density (^ P. 32, 51),

Abnormal transfer corona

current

Replace the transfer corona. The printer requires

service by an Authorized Panasonic Service

Center.

Horizontal faint grey

stripe(s) appear on the

printout

The Process Unit was exposed

to light for more than 5 minutes,

or to direct sunlight

These stripes will automatically disappear after a

few hours.

Paper jams occur

continually

The paper size selected through

the GDI Mode, PCL Mode, or

Control Panel and software

application are different from the

installed paper size

Select the correct paper size through the GDI

Mode {cs" P. 34) or PCL Mode (P. 41), or

Control Panel ( P. 46) and application.

After removing the

jammed paper, the

ERROR indicator still

blinks

Paper fragment(s) remains in

the printer

Move the sensor lever to the upright position by

using an object like a ball point pen. The

remaining fragment(s) will be ejected.

Ejected paper is caught

between the paper

support and the output

tray

There is a space between the

output tray and the paper

support

Slide the paper support down, then extend it

again to remove the space (Step 1 on page

15).

Paper jam has occured

Follow the instructions displayed on the screen. If stains appear on the back of the

printed paper after a paper jam is cleared, it is recommended that you run several

test prints. For Windows users: (i®- P. 24)/For DOS users: { P. 48)

(continued)

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

Panasonic KX-P6500 Bedienungsanleitung Seite 55

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucker Panasonic KX-P6500