Panasonic TYFB9TE Bedienungsanleitung PDF herunterladen (Seite 5)

ANT INPUTANT OUTPUT

switch

Antenna connection

For proper reception of VHF / UHF channels, an external antenna is required. For best reception, an outdoor

antenna is recommended.

VHF Aerial UHF Aerial

75 : Coaxial cable

VCR

Mixer

Notes:

• Do not put the Coaxial cable close to the Power cable to avoid noise.

• Do not place the Coaxial cable under the unit.

• Additional equipment, cables and adapter plugs shown are not supplied with this set.

•

More than 5C type Coaxial cable (75: coaxial) should be used. Otherwise there may be interference on the image.

• Use metallic plug. Otherwise there may be interference on the image.

• If a communal Aerial system is used, you may require the correct connection cable and plug between the wall

Aerial socket and your set.

• Your local Television Service Centre or Dealer may be able to assist you in obtaining the correct Aerial system for

your particular area and the accessories required.

• Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs

incurred, are the responsibility of you, the Customer.

Handling the antenna cable

Back

Route away from

the unit.

Back

Do not route

close to the unit.

Front

Do not pass

around the front of

the unit.

To avoid noise in the video, hold the antenna cable correctly.

Preparation

Connect the mains lead.

Press the switch on the unit to turn the set on.

To switch the unit to Standby mode, press the

button on the remote control.

The unit can be switched on by pressing the button

again if it was switched to Standby mode.

Power lamp (standby: red)

Remote control

signal sensor

Power On / Off

1 2 3 4 5 6 7 8 9 10 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Panasonic TYFB9TE Bedienungsanleitung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für LCD-Fernseher Panasonic TYFB9TE