Panasonic TXP42VT20B Bedienungsanleitung PDF herunterladen (Seite 32)

Replacing the battery■

When the battery is running low, the indicator lamp flashes 5 times when turning the 3D Eyewear on. In this

case, early battery replacement is recommended.

Dispose of the old batteries in accordance with the waste disposal regulations in your local area.

●

Loosen the screw and remove the battery cover using the supplied screwdriver

Screwdriver

(supplied)

Battery cover

Replace the battery

Use the specified type of battery (coin-shaped lithium battery CR2032).●

Note the correct polarity (+ or -).●

Replace and fasten the battery cover

Battery cover

Make sure that the screw is tightened.●

Attaching the nose pad■

Use either nose pad A or B for your comfort.

If you put the 3D Eyewear on vision correction glasses, the nose pad is recommended to be removed.●

Nose pad A

Nose pad B

You can select the positions of the nose pad A from the 2 levels ●

of height. Use upper 2 protrusions or lower 2 protrusions on the

3D Eyewear to attach the nose pad A.

Use all 3 protrusions on the 3D Eyewear to attach the nose pad B.●

Attaching the support band■

If the 3D Eyewear slips out of place, use the supplied support band to hold it in place.

Attach the band to the left and right tips of the frame, and adjust the length.●

Support band

Frame

Push to adjust the

length of the band

When the end of the support band is straightened, form a loop at the end of the band, and fix the twisted part.

Treat the rubber part carefully not to break it.●

Fix the

twisted part

Storing the 3D Eyewear■

Use the supplied 3D Eyewear case to store the 3D Eyewear.●

Avoid storing the 3D Eyewear in hot or highly humid locations.●

Viewing 3D images

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 119 120

Keine Kommentare

Panasonic TXP42VT20B Bedienungsanleitung Seite 32