
- 59 -
Basic
• Use a battery with sufficient battery power when formatting. Do not turn the camera off during
formatting.
• If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
• If the card has been formatted on a PC or other equipment, format it on the camera again.
• It may take longer to format the built-in memory than the card.
• If you cannot format, contact the dealer or your nearest Service Centre.
• Calibration is not done if correct position is not touched. Touch the [i] mark again.
• During the adjustment, fix the camera so that it does not move.
• Make these adjustments if the unit has been dropped or otherwise subjected to a sharp impact,
or if you feel strange or uncomfortable when viewing the recorded 3D images.
• Selecting subjects that are bright, with minimal movement and featuring many different shapes
makes adjustment easier.
• If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
[Format]
The built-in memory or card is formatted. Formatting irretrievably
deletes all the data so check the data carefully before formatting.
[Calibration]
Adjust the position of the touch panel if a different thing gets
selected from what you touched or touch operation does not
respond.
1 Touch [Start].
2 Touch the orange [r] mark
displayed on the screen in order
with the stylus pen (supplied)
(5 places).
•
A message is displayed once the
position is set.
3 Touch [End] to finish.
[Auto 3D Adjustment]
The disparity (image shift) during 3D recording is corrected
automatically by the camera.
1 Touch [OK].
•
[OK] is displayed only when the bar
displayed on the left of the screen
exceeds [ ].
2 Touch [End] to finish.
[Language]
Set the language displayed on the screen.
Kommentare zu diesen Handbüchern