Panasonic WV-Q122A Betriebsanleitung

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.The model number i

10Step 2Mount the cable cap (accessory) on the cable access hole (front).Step 3Make a slit in the center of another cable cap (accessory) wi

11Step 5Lay the cables from the housing base via this blacket into the slit cable cap. Secure the housing base to the wall mount bracket.Att

12[3] Mounting of the camera body on the mount bracketStep 1For the case of color CCTV camera, peel off the seal on the top of the camera, and specify

13Step 4When attaching the camera to the housing base, the posi-tioning pin shall be on the "REAR" side.Make sure that the camera is s

14Ambient operating temperature: –50 °C to +55 °C {–58 °F to 131 °F}Dimensions: 120 mm (W) x 220 mm (H) x 269 mm (D) {4-23/32 inches (W) x 8-21/32 i

15

For U.S. and Canada:Panasonic System Communications Company of North America,Unit of Panasonic Corporation of North Americawww.panasonic.com/business/

2Preface ...

3PrefaceThis mount bracket is used for installing the color CCTV camera and network camera on a wall.Refer to the catalog or operating instructions of

4Precautions for installationPanasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper insta

5Major operating controlsHexagonal screw hole for mounting camera (4 points)Wire hook sectionCamera mounting partCable access hole (front)PlateCable a

6Installations/ConnectionsBe sure to read "Precautions" and "Precautions for installation" before installation.Read the operating

7Step 3Remove the attachment pipe from the upper base by loos-ening 4 screws.Go to " When laying cables through the cable access hole (front)&qu

8Step 2Make a slit in the center of the cable cap (accessory) with a cutter.Step 3Pass the cables from the housing base through this bracket, and moun

9 For the case of the camera with M6 screws being used: Use the screws supplied with the bracket and a hexagonal wrench "for M6".