Panasonic BL-C160 Bedienungsanleitung PDF herunterladen

Important Information

Network Camera

Model No.

BL-C140

BL-C160

PQQX16440ZA KK0408CM0

How to Use the Documentation

This manual is written for both the BL-C140 and BL-C160. Available

features and operations vary slightly depending on the model. You can

confirm the model no. of your camera by checking the model no. printed on

the front of the camera.

Model number suffixes “A” is omitted from the following model numbers

shown in this document, unless necessary. BL-C140A, BL-C160A

All documentation can be found on the included CD-ROM.

• Important Information (PDF format; printed version also included)

This document. Provides general information and safety instructions for

using the camera.

• Installation Guide (PDF format; printed version also included)

Describes how to physically connect the camera to the power supply

and network, as well how to mount or place the camera for regular use.

• Setup Guide (PDF format; printed version also included)

Describes how to set up the camera so that it can be accessed using a

PC.

• Operating Instructions (HTML format)

Explains how to operate, program, and maintain the camera.

• Troubleshooting Guide (HTML format)

Provides solutions for problems you may have when using the camera.

Abbreviations

• The Network Camera is referred to as “the camera” in this document.

• The Setup CD-ROM is referred to as “the CD-ROM” in this document.

IMPORTANT SAFETY INSTRUCTIONS

When using this unit, basic safety precautions should always be followed

to reduce the risk of fire, electric shock, or personal injury.

1. Read and understand all instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Attach the Safety Wire to the camera to prevent it from dropping.

6. After taking away the sand or the dust on the lens cover, wipe the lens

cover with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with

instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other devices (including amplifiers) that produce heat.

9. Protect the AC adaptor cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where

they exit from the unit.

10. The AC adaptor is used as the main disconnect device. Ensure that

the AC outlet is installed near the product and is easily accessible.

11. Only use attachments/accessories such as stand specified by the

manufacturer.

12. Do not touch the unit, the LAN cable, AC adaptor, or AC adaptor cord

during lightning storms.

13. Unplug the unit when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required

when the unit has been damaged in any way, such as when the AC

adaptor is damaged, the unit does not operate normally, or after the

unit has been dropped.

15. Prolonged exposure to direct sunlight or halogen light may damage

the image sensor.

16. Keep the sensor-range caps out of reach of children to prevent

swallowing.

17. Unplug this unit from power outlets if it emits smoke, an abnormal

smell or makes unusual noise. These conditions can cause fire or

electric shock. Confirm that smoke has stopped and contact an

authorized service center.

18. The camera features a splash-resistant body, but it is not waterproof.

19. The AC adaptor, the AC adaptor cord, and the power transfer unit are

not splash resistant, and are intended for indoor use only.

20. When connecting the cable, waterproof the cable using the included

right-angle joint, foam strip and self bonding tape.

21. When installing cables through the ground, do not connect cables

under the ground. Install cables through a conduit to protect them from

water.

22. For BL-C160: LED radiation

CAUTION:

The camera of this unit utilizes LED lights.

Do not look directly at the LED lights for long periods of time, as this can

cause weakened eyesight.

SAVE THESE INSTRUCTIONS

FCC and Other Information

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may

cause undesired operation.

Environment:

Do not install the camera where the temperature is less than -20 °C (-4 °F)

or greater than +50 °C (+122 °F). Allow 10 cm (4 inches) clearance around

the unit for proper ventilation. Avoid excessive smoke, dust, mechanical

vibration, shock, or direct sunlight.

Routine care:

Wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive

powder.

When you leave the unit unused for a long period of time, disconnect the

AC adaptor from the outlet.

If you have any problems:

Consult an authorized Panasonic Factory Service Center.

CAUTION:

Any changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate this device.

CR Coin Cell Lithium Battery Information:

This product contains a CR Coin Cell Lithium Battery which contains

Perchlorate Material - special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

CLASS 1 LED PRODUCT

LED properties

LED output: Max 0.72 mW/Max 0.73 mW

Wavelength: 455 nm/555 nm

Emission duration: Continuous

No responsibility will be taken by our company with respect to

consequences resulting from the use, damage or both of the

camera.

Please read this document before using the product, and save this document for future

reference.

Panasonic Network Camera Website:

http://panasonic.co.jp/pcc/products/en/netwkcam/regionlinks/index.html

Outdoor Ready

1 2

Inhaltsverzeichnis

Seite 1 - Important Information

Seite 2 - For Product Service

Security CautionsWhen using this product, take appropriate measures to avoid the following security breaches.• Disclosure of private information via t

Kommentare zu diesen Handbüchern

Keine Kommentare

Panasonic BL-C160 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Videoüberwachungssysteme Panasonic BL-C160 herunter. Panasonic BL-C160 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Videoüberwachungssysteme Panasonic BL-C160