Panasonic PT-AE4000U Bedienungsanleitung PDF herunterladen (Seite 16)

16 -

NGLISH

Basic

Operation

Switching the projector on/off

Basic Operation

Power cord

Connecting

Make sure the shape of the power plug and the 1.

AC IN terminal on the back of the projector match,

then push the plug all the way in.

Align the side of the 2. power cord secure lock with

the side guide rail of the AC IN terminal of the

projector and slide it in.

Rail guide

Place the latch to the latch catcher and press until 3.

it clicks.

Latch

Connect the power cord to a wall outlet.4.

Disconnecting

Unplug the power cord from the wall outlet.1.

Depress the latch and slide the cover off.2.

Slide the power cord secure lock up along the side 3.

guide rail.

Hold the plug and unplug it from the 4. AC IN

terminal on the back of the projector.

NOTE:

Do not use other than the provided power cord. •

Ensure all the input devices are connected and turned off before connecting the power cord. •

Do not force the connector as this may damage the projector and/or the power cord. •

Dirt or dust build-up around plugs may cause re or electrical hazards. •

Switch off the power to the projector when not in use. •

Power indicator

Power indicator informs you of the status of the power.

When the

TEMP indicator is ashing, the power

indicator will turn red, and you cannot switch on the

power.

Power indicator

Indicator status Status

No illumination or ashing MAIN POWER is switched off.

Red

Lit MAIN POWER is switched on and the projector is in standby mode.

Flashing

MAIN POWER is switched on (standby mode) and the POWER ON LINK is set to

YES.

The power consumption is not much different when it is lit.

•

( See “VIERA Link Connection” of the functional instructions that is in the provided

CD-ROM.)

Green

Flashing The power button is switched on and the projector is getting ready to project.

Lit Projecting.

Orange

Lit The power button is switched off and the projector is cooling the lamp.

Flashing

The power button is switched on again when cooling the lamp and recovering to

projection mode. Recovery may take a while.

NOTE:

See “TEMP indicator” on page • 25.

While the projector is cooling the lamp, do not switch • MAIN POWER off or unplug the power cord.

The electric consumption in standby mode is 0.08 W. •

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Panasonic PT-AE4000U Bedienungsanleitung Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren Panasonic PT-AE4000U