Panasonic KX-P3123 Bedienungsanleitung PDF herunterladen (Seite 97)

Inilializalion

The printer is initialized under the following conditions:

— the AC power is turned on

— the PRIME signal is received

— the RESET PRINTER command is received

— the clear buffer function is used

When the printer is initialized, the following conditions are set:

— the print buffer is cleared

— the receive buffer is cleared (not cleared by RESET PRINTER command)

— the download character buffer is cleared (not cleared by PRIME signal in IBM Proprinter X24E

mode or by RESET PRINTER command)

— the initial setup modes are read and set

— horizontal tabs are set every 8 columns

— vertical tab settings are cleared

— all modes set by control and escape commands will be cleared

— present form position is designated as Top of Form

— the self test mode is cleared

— the control panel settings are read and set

____

— control panel settings are not changed by PRIME signal or RESET PRINTER command*

— the printhead goes to the home position

Some software packages send PRIME signal at the beginning of their programs. Print modes set

by the control panel will not change.

User Clear Function

This function initializes the printer from the control panel. This feature is very useful when you want to

clear the receive buffer (information recently sent from the computer and is currently printing) without

changing the control panel.

Press fON LINE^I to stop the printing

and enter the OFF LINE mode.

A MICRO LF

ON LINE

FONT

FF II ^^J^nJN^Nl

PITCH FORM LENGTH EXIT

While pressing ( FUNCTION ] , press

( LF) to clear the data in the receive

buffer.

Press (ON LINE) to re-enter the

ON LINE mode.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 115 116

Keine Kommentare

Panasonic KX-P3123 Bedienungsanleitung Seite 97