Panasonic KX-T7775 Bedienungsanleitung PDF herunterladen (Seite 8)

Installing the Panasonic KX-T7775 Doorphone

The Panasonic KX-T7775 Doorphone can be surface or flush-mounted.

To surface-mount the Panasonic KX-T7775 Doorphone Module:

1. Separate the Doorphone Unit into two halves.

2. Adjust the sensitivity of the Doorphone's microphone, if required (see

 page 11).

3. Remove the required pop-outs on the back of the Unit and slide the

 wires through the back of the Unit. Connect to the Doorphone's

 terminal block.

4. Secure the Unit to the wall using the appropriate screws (not

 supplied).

5. Re-connect the front panel to the back unit using the supplied 10 mm

 ( / ") M3 threaded screws.

To flush-mount the Panasonic KX-T7775 Doorphone:

1. Separate the Doorphone Unit into two halves. Discard the rear

 section of the Unit.

2. Adjust the sensitivity of the Doorphone's microphone, if required (see

 page 11).

3.Attach the gasket to the rear of the interface bracket, as shown in

 Figure 8. (The gasket side faces the wall.)

4. Gang-box only: Attach the interface bracket to the gang-box using

 screws (not supplied) (see Figure 9).

 Recessed only: Attach the interface bracket to the wall using the

 appropriate screws (this is dependent on the surface structure) (see

 Figure 10). Refer to the mounting template, on page 15, for drilling

 positions.

Figure 8 Figure 9

Rear View

Figure 7 - KX-TDA100/200: Connection Details

KX-TDA100 / 200

NOT

USE

NOT

USE

345

NOT

USE

NOT

USE

NOT

USE

NOT

USE

NOT

USE

NOT USED

MODULAR

PLUG

TAB

UPWARDS

POWER

MODULE

MODULAR

JACK

POWER

MODULE

POWER

MODULE

POWER

MODULE

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

Panasonic KX-T7775 Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Telefone Panasonic KX-T7775